Can anyone here tell me how to reset my Hydra humidifier? Since the weather has warmed up, my Hydra keeps reading 70 but my Hygrometer says 65. I want it back to the good ol days when they both said 70.
-
BOTL UPCOMING MAINTENANCE
Hi Everyone, as mentioned in my introduction post, BOTL needs quite a bit of updating, patching and whatever else I might come across. Over time BOTL may be unreachable on occasion as I do migrations or updates, etc. Just be patient - we'll be back! I'll generally try to keep these maintenances until later in the evenings.
Help with my Hydra??
- Thread starter SergeantStogie
- Start date
WhiteLightning
This is WhiteLightning!
Try to salt test your hygro first. If you're hygro is good I wouldn't worry about the hydra so much. Also, are they both in same place because humididty rises.
SkinsFanLarry
Craft Beer Addict!
- Joined
- Oct 14, 2008
- Messages
- 14,355
Try this Sarge....
Calibration & Adjustment
Your Hydra Electronic Cigar Humidifier is pre-calibrated at the factory but is also equipped with an LED adjustment knob for additional fine tuning of the humidity reporting should you need or desire to sync it to a pre-calibrated hygrometer, or to perform a periodic salt test for accuracy.
Turning the adjustment wheel on the control unit will adjust the humidity reading 1% for every 1 click of a turn. Turning Clockwise increases the percentage, and Counter-Clockwise decreases it. (Ex: The LED should read 75% but it is reading 72%. Turn the adjustment knob 3 clicks Clockwise.)
Link
Calibration & Adjustment
Your Hydra Electronic Cigar Humidifier is pre-calibrated at the factory but is also equipped with an LED adjustment knob for additional fine tuning of the humidity reporting should you need or desire to sync it to a pre-calibrated hygrometer, or to perform a periodic salt test for accuracy.
Turning the adjustment wheel on the control unit will adjust the humidity reading 1% for every 1 click of a turn. Turning Clockwise increases the percentage, and Counter-Clockwise decreases it. (Ex: The LED should read 75% but it is reading 72%. Turn the adjustment knob 3 clicks Clockwise.)
Link
Thanks guys!