Hi Everyone, as mentioned in my introduction post, BOTL needs quite a bit of updating, patching and whatever else I might come across. Over the next few weekends BOTL may be unreachable on occasion as I do migrations or updates, etc. Just be patient - we'll be back! I'll generally try to keep these maintenances until later in the evenings.
*HerfDog is partially right; there's no thermostat display, but there is a dial on the inside, upper left wall. I don't have the 32 yet (ordering in a few days) but I did have the 16btl and it worked well. It's fans only run when the thermo kicks on and since I use several hygrometers in it, I monitored the temp. It has a removable water tray beneath which receives condensate from the drain hole, which most recommend plugging that hole to further seal in humidity. I'll deal with the inevitable puddle by laying a nylon full of beads in it to absorb and redistribute that moisture. Just be sure to not let wood contact the back wall. I like it because its bigger and cheaper than the NewAir and if (perish the thought) I grow out of it, its cheap enough for a second one. Hope this helps bro...
