What's new
  • BOTL UPCOMING MAINTENANCE

    Hi Everyone, as mentioned in my introduction post, BOTL needs quite a bit of updating, patching and whatever else I might come across. Over time BOTL may be unreachable on occasion as I do migrations or updates, etc. Just be patient - we'll be back! I'll generally try to keep these maintenances until later in the evenings.

Am I charring too much while lighting?

Rating - 100%
1   0   0
Joined
Nov 10, 2016
Messages
94
Hi all!
So I have looked up proper lighting techniques to cigars, and started applying them to my own smokes.

When first lighting, using a torch lighter, I've been holding the cigar about 45 degree angle and well above the flame, rotating it until the entire brim of the foot has a glow. Then I ignite the rest of the foot, being careful not to allow the flame to actually touch the stick.

The first couple I lit like this went fine, but the last half dozen or so have developed a fair amount of discoloration/blackening spreading from the actual burn line, and I don't remember seeing that before. I included a picture to show what I'm talking about.

This specifically occurs while I'm toasting the wrapper/outer edge of the foot.

I'm being very careful to try to be accurate with the torch while toastingetting - but this discoloration makes me wonder, am I screwing up the light?

Or, is it perhaps that my cigars are too dry and the delicate wrapper is literally scorching when it shouldn't be?
20161117_114622.jpg
Thanks for any input!
 

jasonsbeer

Never Settle
Rating - 100%
52   0   0
Joined
Jan 4, 2015
Messages
1,539
Location
Iowa
I find it helps to hold the torch far away from the cigar and slowly bring it closer as it starts to glow, all the while turning it at about 45 degree increments every 2-3 seconds. I work from the middle out. Wait for the middle to start glowing and then work out to the edges.

This technique seems to work for me to help keep wrapper charring to a minimum. It has also been a long time since I had a wonky burn.
 
Rating - 100%
67   0   0
Joined
Apr 26, 2015
Messages
2,780
Location
Redlands
Hi all!
So I have looked up proper lighting techniques to cigars, and started applying them to my own smokes.

When first lighting, using a torch lighter, I've been holding the cigar about 45 degree angle and well above the flame, rotating it until the entire brim of the foot has a glow. Then I ignite the rest of the foot, being careful not to allow the flame to actually touch the stick.

The first couple I lit like this went fine, but the last half dozen or so have developed a fair amount of discoloration/blackening spreading from the actual burn line, and I don't remember seeing that before. I included a picture to show what I'm talking about.

This specifically occurs while I'm toasting the wrapper/outer edge of the foot.

I'm being very careful to try to be accurate with the torch while toastingetting - but this discoloration makes me wonder, am I screwing up the light?

Or, is it perhaps that my cigars are too dry and the delicate wrapper is literally scorching when it shouldn't be?
View attachment 88384
Thanks for any input!
I recommend you give "toast and cut" a try. Also when you toast, try to toast across the foot, meaning hit the edge farthest from the flame.
 

ChefBoyRG54

BoM Sept '14 & BoY 2014
Rating - 100%
218   0   0
Joined
Jun 16, 2013
Messages
14,409
Location
Sterling Hts, MI
Where did you find a hotel you can smoke in?! You could also post this in the Winter Smoking Suggestions thread. I'm going to go move into a hotel now!
I have a smoking room in my hotel in hong kong tonight.

And in mainland china you can smoke pretty much wherever you want.

You could do that when America was great...
 
Rating - 100%
6   0   0
Joined
May 24, 2016
Messages
308
Location
NJ
You are doing it wrong. In order to better assist you in your endeavor, i whipped up a tutorial as i sit in my hotel room bored...and lonely.


You sir are welcome!
3 matches and lit?? Shit I need to practice more apparently. Honestly the lighting is still something that is hit and miss for me. Though you had the whole no wind in the room going for you there.
 
Top