Hi Everyone, as mentioned in my introduction post, BOTL needs quite a bit of updating, patching and whatever else I might come across. Over the next few weekends BOTL may be unreachable on occasion as I do migrations or updates, etc. Just be patient - we'll be back! I'll generally try to keep these maintenances until later in the evenings.
What kind of butane are you using? I used cheap butane from the drug store before in my
Xikar and it got clogged and wouldnt light. Your description almost sounds like my experience, thats why I ask. Ive been using butane from my B&M now and havent had a problem with either of my Xikar lighters since. Just a thought.
This is the key. Use triple refined fuel and purge it every time before you refill it.I used to have the same issues with lighters and some will just stop working or start giving you problems because of some very simple causes.
1. Cheap butane ( fuel )
2. Not purging the ligher before re-filling.
3. Not screwing the insert towards the - all the way.
4. Overcharging the lighter and blowing out the seal.
One can take the lighter apart and go thru it and repair them if you own a lighter that you paid dearly for but if it's a Ronson or something else at a low price point just get another one. I use the same Ronson I have had for a couple of years and it works every time because of the procedures I use above.
Very true...problem is you will have to send it back. They take a $3 lighter, and charge $35 for it. If you replace it 5 times they are still making money...yes the policy is good, but having to use it every other month sucks. Just my experience...I will not buy a Xikar lighter again.Just buy a xikar and you won't ever have a problem because if the lighter sh*ts out you can just send it back. They have the best return policy ever!
Good info here, and I see several following comments about purging the lighter before refilling, but I am not sure exactly how to do that. :scratchheI used to have the same issues with lighters and some will just stop working or start giving you problems because of some very simple causes.
1. Cheap butane ( fuel )
2. Not purging the ligher before re-filling.
3. Not screwing the insert towards the - all the way.
4. Overcharging the lighter and blowing out the seal.
One can take the lighter apart and go thru it and repair them if you own a lighter that you paid dearly for but if it's a Ronson or something else at a low price point just get another one. I use the same Ronson I have had for a couple of years and it works every time because of the procedures I use above.
Use something to push down the little tube in the center of the valve until nothing comes out anymore.Good info here, and I see several following comments about purging the lighter before refilling, but I am not sure exactly how to do that. :scratchhe
Thats correct, but never ever use a pencil!!Use something to push down the little tube in the center of the valve until nothing comes out anymore.
Hey Larry do I purg it at the site where I fill it at? I have never done this either.Thats correct, but never ever use a pencil!!
By purging you eliminate the possibility of getting air bubbles in your lighter....no air bubbles means it's full to it's capacity!
seriously?Very true...problem is you will have to send it back. They take a $3 lighter, and charge $35 for it. If you replace it 5 times they are still making money...yes the policy is good, but having to use it every other month sucks. Just my experience...I will not buy a Xikar lighter again.
Yes. You just manually depress the valve until gas stops coming out.Hey Larry do I purg it at the site where I fill it at? I have never done this either.
Thanks,