Is this the one from air-n-water that comes with shelves and drawers, or did you have them made separately?so update I got my wineador a couple days ago with my drawers and shelfs. I prep the fridge plastic smell was gone in 24 hrs. Then bought kl pecto brand put about 1 1/2 pound. I put one on the bottom and the middle plus two tube. So far it's sitting good temp 68 degrees and humidity 67% right now. See how it goes after a few hours. I have almost two drawers filled and two cases which is uf-13 and dirty rats. Drew estate show happening this week so I'm getting a few more.
The one from air n water. Got to say the construction built pretty decentIs this the one from air-n-water that comes with shelves and drawers, or did you have them made separately?so update I got my wineador a couple days ago with my drawers and shelfs. I prep the fridge plastic smell was gone in 24 hrs. Then bought kl pecto brand put about 1 1/2 pound. I put one on the bottom and the middle plus two tube. So far it's sitting good temp 68 degrees and humidity 67% right now. See how it goes after a few hours. I have almost two drawers filled and two cases which is uf-13 and dirty rats. Drew estate show happening this week so I'm getting a few more.
Nice. I've been eyeballing that one. Good to hear positive feedback. I plan on moving to a wineador soon.The one from air n water. Got to say the construction built pretty decentIs this the one from air-n-water that comes with shelves and drawers, or did you have them made separately?so update I got my wineador a couple days ago with my drawers and shelfs. I prep the fridge plastic smell was gone in 24 hrs. Then bought kl pecto brand put about 1 1/2 pound. I put one on the bottom and the middle plus two tube. So far it's sitting good temp 68 degrees and humidity 67% right now. See how it goes after a few hours. I have almost two drawers filled and two cases which is uf-13 and dirty rats. Drew estate show happening this week so I'm getting a few more.
For what I know yes. Unless I reset it and calibrate it again. The bottom goes 69%-71% but stays constant at 70%. Top at the moment is at 74%. But here's the thing should I put kl without distilled water and only spray if the levels are low? Because what I did poured distilled water in it let it soak for couple min and drain it. Could it be that the water making the humidity to height?You sure your hygrometer is reading true?
Yes, WAY too much water. The KL I had was low 60s RH right out of the bag. You should have your environment stable, wood seasoned, before you even add your RH media. I would pull the drawers for a day, or at least leave the door open and let some of that humidity out.For what I know yes. Unless I reset it and calibrate it again. The bottom goes 69%-71% but stays constant at 70%. Top at the moment is at 74%. But here's the thing should I put kl without distilled water and only spray if the levels are low? Because what I did poured distilled water in it let it soak for couple min and drain it. Could it be that the water making the humidity to height?You sure your hygrometer is reading true?
My experience with kl was that mine only needed a spritzes of dw and was ready to goYes, WAY too much water. The KL I had was low 60s RH right out of the bag. You should have your environment stable, wood seasoned, before you even add your RH media. I would pull the drawers for a day, or at least leave the door open and let some of that humidity out.For what I know yes. Unless I reset it and calibrate it again. The bottom goes 69%-71% but stays constant at 70%. Top at the moment is at 74%. But here's the thing should I put kl without distilled water and only spray if the levels are low? Because what I did poured distilled water in it let it soak for couple min and drain it. Could it be that the water making the humidity to height?You sure your hygrometer is reading true?
You didn't wipe your wood with water, too, did you?
Yes I seasoned the wood left it for a day and then started the rhYes, WAY too much water. The KL I had was low 60s RH right out of the bag. You should have your environment stable, wood seasoned, before you even add your RH media. I would pull the drawers for a day, or at least leave the door open and let some of that humidity out.For what I know yes. Unless I reset it and calibrate it again. The bottom goes 69%-71% but stays constant at 70%. Top at the moment is at 74%. But here's the thing should I put kl without distilled water and only spray if the levels are low? Because what I did poured distilled water in it let it soak for couple min and drain it. Could it be that the water making the humidity to height?You sure your hygrometer is reading true?
You didn't wipe your wood with water, too, did you?
I removed all kl and put dry stuff we see how it goes threw the day. Thanks for the info will keep you updatedI got your Pm, but these guys already answered well. You waaaay over saturated the KL. Dry it out, or just remove it and out in other dry KL.