What's new
  • BOTL UPCOMING MAINTENANCE

    Hi Everyone, as mentioned in my introduction post, BOTL needs quite a bit of updating, patching and whatever else I might come across. Over the next few weekends BOTL may be unreachable on occasion as I do migrations or updates, etc. Just be patient - we'll be back! I'll generally try to keep these maintenances until later in the evenings.

Question About Temperature Difference

Rating - 100%
1   0   0
Joined
Oct 5, 2018
Messages
334
Location
Louisville KY
This may be a silly question but in the bottom of my Newair CC300 the temp is reading 3-4 degrees higher on the bottom then in the middle and top. The bottom is where the 2 drawers are. What could cause that?
 
Rating - 100%
1   0   0
Joined
Oct 5, 2018
Messages
334
Location
Louisville KY
Thanks for your input. Thinking through the issue I thought about air flow and I rearranged the two drawers so that they are not together but have a shelf above each one. The temps are all now just 1 degree difference and about 3 percent difference in the RH.
 
Rating - 100%
1   0   0
Joined
Oct 5, 2018
Messages
334
Location
Louisville KY
Thanks Nacho. This group and a lot of advice I got from the great folks here helped. I’m going to be posting about the issue I had and the adjustments I made so that maybe another newbie like myself can avoid this kind of pitfall.
 
Top