What's new

Today's Smoke (2004-2022 Archive)

Status
Not open for further replies.
Rating - 100%
64   0   0
Joined
Apr 25, 2014
Messages
7,690
Location
Gilbert AZ
Interesting, so basically you made and x, then re cut the x again? Never tried this, now I have re-cut just a single v-cut before and have had success, will have to try this sometime
I recently saw it on social media and figured I would test it and see if it was just a visual thing, but if you have something drawing tight it could help open it up if the tightness is in the head of the stick. It is going to work better on larger ring gauges
 

irratebass

www.blindmanspuff.com
Rating - 100%
49   0   0
Joined
Sep 29, 2014
Messages
6,184
Location
Mooresville, IN
I recently saw it on social media and figured I would test it and see if it was just a visual thing, but if you have something drawing tight it could help open it up if the tightness is in the head of the stick. It is going to work better on larger ring gauges
I see, and that makes sense. Usually I just screw the perfecdraw in and i'm usually good, but I will have to try this just for poops & laughter
 
Status
Not open for further replies.
Top