So I made a poor decision and bought an inexpensive humidor off amazon and after the humidity was inconsistent for a while I decided to check the seal, and found the push in hygrometer in the front of the box had almost not seal around. In an attempt to fix that, I ended up breaking the POS hygrometer. I took that as an opportunity to put a more personal touch on my humidor, and fix the seal for good. Special thanks to ilikefishes for sending me some Spanish cedar to make the wheel out of along with some good sticks. Not a real extravagant project, but I accidentally got some of the black sealant on the crest, and pewter is pretty soft, I was hoping someone would have a good solution to get it out other than picking it out with a sharp object. Thanks for any advice. (Far left is original pic I stole off google)