Thought I would show off this little Nubber/Draw Tool I made out of a Darning Needle, and Rubber Stopper.
The needle was bought at Wally World for under $2.00 for a (7) Pack, and I found the stoppers at True Value Hardware for $.20 each.
I basically forced the sharp end into the small end of the stopper far enough to cover the Eye the Needle, then turn the Needle over, and worked it is to the stopper.
My guess is the rubber expanded around the Eye of the Needle, and so far no lost Needles.
Poorman's Nubber/Draw Tool works well as you have about 2.5 inches of Draw Enhancer.
The needle was bought at Wally World for under $2.00 for a (7) Pack, and I found the stoppers at True Value Hardware for $.20 each.
I basically forced the sharp end into the small end of the stopper far enough to cover the Eye the Needle, then turn the Needle over, and worked it is to the stopper.
My guess is the rubber expanded around the Eye of the Needle, and so far no lost Needles.
Poorman's Nubber/Draw Tool works well as you have about 2.5 inches of Draw Enhancer.
